WIDELY USED.For making led screen, led wall, advertising board, applied to hotel, KTV, Bars, commercial street atmosphere lighting and Wedding, Halloween, Christmas holiday décor.
SAFETY & EASY INSTALLATION.Work under DC6V, low voltage for human safety, low power consumption, energy-saving, super-bright but running with low temperature.
It comes with self-adhesive 3M tape on its back, so you can fix it on any dry and flat surface without any screws and clips.
Input voltage: DC5V
Led SMD Qty: 30pcs RGB SMD5050 per meter
Power:9W/m, total is 45W Signal: WS2811 chip built-in 5050SMD
Wave length(NM):R, 650nm ; G, 520nm ; B, 460nm
Dimension:L196* W0.47 * H0.12inches
PCB color: White
Life span:50000hrs Warranty:2year
Waterproof: IP67 waterproof
1x 16.4ft WS2812B LED strip light
1x mini controller
Kindly note :
1) It comes without power supply. And just come with a mini controller for test.
2) These LED's use about 9.5 Watts max (~2 Amps @ 5V) per meter. The max rating is assuming all the LEDs are on full white, usually the actual current for colorful design is about 1/3 to 1/2 the max current.
3) Second, to get high density, the controller chip is inside the LED, which is kind of cool, but also means that the chip only uses a single pin for input and a single pin for output. The protocol used is very timing-specific and can only be controlled by microcontrollers with highly
repeatable 100nS timing precision. Work with the Raspberry Pi, Arduino Uno/Mega microcontroller at 8MHz and 16MHz, or Beagle Bone Black , but it will not work with the Basic Stamp, NETduino or any processor slower than 8 MHz.
4) The way the pixels are controlled by an Arduino, the entire strip must be buffered in memory.
Loading offers ...
* The prices and shipping costs may have changed since the last update. It is technically not possible to update the prices in real time. The time of purchase on the Website of the seller is used as the reference.