This PDR T-Bar puller is a lightweight glue tab pulling tool, meant to be used when repairing pressure dents and any dent that isn't sharp or creased.
The tension puller works well with a tap down hammer when pulling large dents.
It's very easy to control, everyone can removal the dent easily by yourself.
We Offer triple guarantee 100% Money Back Guarantee:
1. If you're not 100% happy with it, ship it back and we will refund your money.
2. If any part breaks or is damaged, ship it back and we will replace it for FREE.
3. If you ever lose the product, just let us know and we will ship you out another one....for free!
4. If you need more puller tabs after you order it in 1 year let us know we will ship you more for free!
How to use:
1.Clean the dent with a clean wet cloth;
2.Mount the glue stick into the glue gun, pull the trigger to let the glue stick enter into
the glue gun, connect the power source and preheat for 5 minutes;
3.Use a proper drawing gasket. Large dent requires a large drawing gasket.
4. Pull the trigger and apply the drawing gasket with extruded glue;
5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres;
6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent;
7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen;
8. Clean the repaired place with a clean wet cloth.
24x PDR Pulling Tabs
1x 2 in 1 Dent Removel T Bar Tools
Note:Only contains T bar and puller tabs. If you need a glue gun