100W CO2 Laser Power Supply for Engraver Engraving Cutting Cutter
by Hanchen Instrument
The product usually takes 7--13 business days to arrive to your hand after your order is confirmed
1. High response speed, Dramatically lengthen the life of laser.
2. Easy control: The start and stop of laser can be easily controlled by TTL level. And there are protection switch to test the external water, ventilation, etc.
3. Easy control of laser power: Both 0 - 5V analog signal and PWM signal can control the laser power.
4. The power supply has open circuit protection: Under the condition of good protective earthing, the power supply can work in open-circuit for a short time, which could avoid the damage of laser power supply because of the bursting of laser tube, thereby enhancing the life of power supply.
5. The power supply can take feedback interface which can be used in closed-loop control and testing the working current of laser.
6. Application: Acrylic sculpture, cut; fabric sculpture, cut; rubber sheet sculpture, cut; etc.
AC Input Voltage: AC 220V or 110V
AC frequency: 50Hz or 60Hz
Maximum Input Power: 550 w
Maximum Input current: 5A
Maximum Output voltage: DC 40 KV
Maximum Output current: 23 mA ( up to the laser tube)
Response time: 1ms (from turn on to the output current up to 90%)
Operating temperature: -10°C~+40°C
Relative humidity: 90%RH
1).Input-Output: AC1500V 1min.10mA
2).Input-shell: AC1500V 1min.10mA
Dimensions: 280 mm*173 mm*97 mm(L*W*H)
we will send the product to you as soon as possible
If you have any questions
Loading offers ...
* The prices and shipping costs may have changed since the last update. It is technically not possible to update the prices in real time. The time of purchase on the Website of the seller is used as the reference.
Latest products for Price Comparison