Do you worried about the expansive fee when need to replace the damaged or outdated whole fixture Please do not worry, cause from now on, a fast, easy, economic, bright magnetic retrofit kit will solve your problem. Just need to install the retrofit kit inside the fixture without changing the whole fixture, saves money and time. It is your best choice!
Four Steps for Magnetic Strip Kit Installation
Step 1: turn off the power, remove fluorescent lamps, ballast, and all the other parts.
Step 2: Fasten the strips and driver Simple Magnetic installation
Step 3: The driver wire connects with kits wire, use insulated caps to connect the power line and driver's line
Step 4: Install the cover of driver, close fixture cover and turn it on.
Tip: If you don't know how to install, please see the picture, it will show clearly how to do.
Voltage: 100-277V AC
Lumen: 2800 LM
Startup Time: Instant On
Safety Certifications: UL.DLC.ETC
With 1 Magnetic Driver and 2 Magnetic Strips
Mounting method: Magnetic, quick connect
1.When install the magnet retrofit kit, must cut off the power to ensure personal safety.
2.Our retrofit kit is suitable to 0-10V dimmer, check the type of your home dimmer before buy it.