Home » Catalogue » Electronics » Musical Instruments » Microphones & Accessories » Product details
Price comparison product image Marantz Professional Pod Pack 1 / Broadcast Boom Arm with Included USB Condenser Microphone

Marantz Professional Pod Pack 1 / Broadcast Boom Arm with Included USB Condenser Microphone

by Marantz Professional
New from:
US $49.00
Used from:
US $30.00
see website
Prices may incl. VAT *
Last refresh May/18/2019 11:46 AM
Marantz Professional
Having a quality microphone is only half the battle. You won’t get the most out of your recording session without the right set up, too.

The Marantz Professional Pod Pack 1 consists of a high-quality cardioid condenser microphone paired to an adjustable suspension boom arm with 15.75” to 27.5” telescoping range. Keep the desk clear and the microphone always in position for podcasting, on-air announcing, or voice-over applications.

The all-steel construction makes sure all of the Pod Pack 1 will hold up to your demands wherever you take it.

Frequently Asked Questions

How do I mount the boom arm and microphone
The Pad Pack 1 comes with a custom mount for mounting to your included boom arm or mic stand. It's always recommended to mount the included mount first before attaching the microphone to prevent any accidental damage to the mic. Here is a simple procedure to follow:
1. Attach the included clamp for you boom stand to your table.
2. Loosen the screw on the clamp and place the boomstand into the mounted clamp then tighten until secure.
3. Hold the shock mount firmly in one hand and bring the mounting piece up to meet the threaded end of the arm on your boom arm.
4. Instead of spinning the shock mount, continue to hold it in one hand while using the other hand to spin the arm of the microphone stand, screwing it into the shock mount's mounting piece.
5. Once the shock mount is secured firmly to the microphone stand, position the shock and tighten the screws on the shock mount and boom arm so that they stay firmly in place.
6. Place the microphone in its mount.
7. While holding the microphone in one hand, gently spin the microphone mounting piece on the mount to secure the microphone in place.

Important: Always, make sure that the screws on the microphone, shock mount and stand are loosened before making any adjustments to their angle. Forcing any joint without properly loosening it's screw can damage and strip the joint, affecting its ability to remain secure. The joints should also never be made too tight and should never require more pressure than can be provided by one hand. Again, this can damage the joint and affect its ability to remain secure in the future.

Which side is the front
The Pod Pack 1 is a side-address microphone, meaning the capsule is parallel to its body. The microphone will accept sound from sources perpendicular to the microphone body, as opposed to a front-address microphone, like the Shure SM58, that accepts sound from its top or end.

When positioning the Pod Pack 1, the front will be the side marked by the Marantz logo. Point this side towards your source for the best results.

Further Technical Support
Whether you are a customer or dealer, if you already own a Marantz Professional product, or if you just have pre-sales questions, the Marantz Professional technical support team is available to help!
Visit the link below to connect with any of the following support options: phone support, email support.
• marantzpro.com/support

Technical Specifications
Element: Back electret condenser
Polar pattern: Cardioid
Frequency response: 20 - 17, 000 Hz
Sensitivity: -34dB +/-2dB (0dB = 1V/Pa @ 1kHz)
Output impedance: 100 +/-30% (at 1kHz)
Load impedance: >1k
Self noise: 16dBA
Max SPL: 132dB (@ 1kHz < 1% THD)
Signal to Noise ratio: 78dB

Broadcast Boom Arm
• Adjustable height and angle
• Telescoping range: 15.75” - 27.5”
• Weight: 13.5oz
• Microphone
• Boom arm and stand
• USB cable
• User manual
• Safety & Warranty Information

Box Contents
• Microphone
• Boom arm and stand
• USB cable
• User manual
• Safety & Warranty Information

Latest products for Price Comparison

* The prices and shipping costs may have changed since the last update. It is technically not possible to update the prices in real time. The time of purchase on the Website of the seller is used as the reference.