Type: 5V USB LED Strip
Material l: plastic, resin
PCB width: 10mm
PCB color: black
Waterproof: IP65 / IP20
LED type: SMD 5050
Number of LEDs: 30 leds / m
Beam angle: 120 degrees
Storage temperature: -40 80 degrees Celsius
Working temperature: -25 60 degrees Celsius
Remote control: IR 24Key
Note: All controllers are not equipped with batteries, because China Post refuses to accept them, you need to add battery (CR2025), the remote control can work normally.
Easy to install:
- It can also be used for your phone / charger (5 V1A / 2A)
1. Cut (as needed): Cut the cut marks (white lines) on the strip to the desired length.
2. Press the strap firmly into the desired position and connect the USB to the USB port.
3. On the controller you purchased, you can adjust the mode and color of the LED strip. Each controller has a unique mode
1. Clean the dust, make sure there is no dust on the back of the TV, and then install it to avoid falling.
2 power USB port supply can not reach a small part of 1A / 2A TV, through the USB port of the TV to the tape, sometimes not lit or flashing, you can use V charger universal USB wall with 5 V 2A- 3A feeds LED strips.
The matte back cannot be stuck securely.
1 x 50 cm: You will get a 50 cm LED strip and a remote control unit of your choice
1x200 cm: You will get 1 200cm LED strip and 1 remote control type
1 x 300 cm: You will get a 300 cm LED strip and a remote control type of your choice
1x400 cm: You will get 1 400 cm LED strip and 1 remote control type of your choice
1 x 500 cm: You will get 1 500 cm LED strip and 1 remote control type, you can