1. Clean the glass surface first and keep it smooth.
2. Tear off the transparent protective film (with the help of tape)
3. Spray a lot of water on the glass before pasting.
4. Stick the smooth side of the sticker to the glass.
5.Use rulers or cards to remove water and bubbles.
6. Use a knife to cut off excess parts, and then do not move the stickers.
3-D flash point semi-permeable static Glass Sticker is made of imported materials, with flash points on the surface, flashing under the illumination of light, blurred pattern of common ground glass, perfect and brilliant color of flash point Glass Sticker .
At the same time, the shielding effect is much better than that of common ground glass paste, waterproof and scratch-proof, strong adhesion, thicker base material, static adsorption, no blister, no residual glue, no shrinkage, no glue. No warping. After tearing off, it can be repeatedly pasted on other glass surfaces.