The wiring harness for LED off road lights is the perfect accessory for off road vehicles, working vehicles, and any automobile that could use a relay to power specific equipment. Consisting of a 40 AMP relay, a 4 model REMOTE CONTROL SWITCH(ON-OFF-STROBE), and 9 feet of wiring, this wiring harness for LED off road lights simplifies the installation process of powering various equipment on all automobiles.
All automobiles and devices equipped with a 10 to 24 Volt DC power source.
Illuminated on/off switch
40A Power Relay
Inline Blade Fuse
More than 9ft of wiring
2 sets of power connectors to light fixtures
1 x Wiring Harness
Full Wiring Kit for All Light Bars with 4 model REMOTE CONTROL SWITCH ON/ OFF/STROBE switch
1. connect the the red+ wire from the fuse to battery +; connect the black wire from the reply to the battery -;
2. connect the wire for lights bar from the relay; (red/black correspond to the wire of lights bar)
3. turn on on/off button of switch to test the lights bar
4. test remote switch