Mini USB & Micro USB Dash Cam Hardwire Kit with Mini / LP Mini / Standard / ATO Fuse Tap Adapter Blade Fuse Holder Compatible with Dash Cam, GPS, Radar Detector and All other Mini and Micro USB Port Device
Prices may incl. VAT *
Last refresh Dec/26/2018 10:33 AM
Connector: Mini USB Connector+Micro USB converter
Input Voltage: DC12V-24V
Output Voltage/Current: 5V/2A Max Support to 2A
Low Voltage Protection: Car 11.6V, Truck 23.2V
Cable Length: 15ft
The Hardwire kit for dash cameras that use Mini USB or Micro USB
Low Voltage & Car Battery Protection, automatic cut off when voltage below 11.6V or 23.2V.
FM/AM Anti-Interfere Protection
Free up the Cigarette lighter(12v Power Socket) For other devices
Achieve Dash Cam's Parking mode, power camera when ignition is turned off
1*Mini USB Hard Wire Kit
1*Micro USB Converter
1*Standard ATO Fuse Tap Adapter+5Amp Fuse
1*Mini(ACN) Fuse Tap Adapter+5Amp Fuse
1*Low Profile Mini(ACS) Fuse Tap Adapter+5Amp Fuse
1*Micro2 Fuse Tap Adapter+5Amp Fuse
1 Find ACC in the car(ACC position differs from different car brands
2 Open ACC cover plate, measure the place for wiring, long-time parking monitor need to connect with BATT.
3 When vehicle hard wire kit goes to A point, open frame cover, make it as concealed wiring; open closed soft glue, put cable into it.
4 Open fuse box cover, let cable inside
5 Red wire of low voltage protector connect to positive pole(BATT+), black wire connect to the negative pole(Ground).
Latest products for Price Comparison
* The prices and shipping costs may have changed since the last update. It is technically not possible to update the prices in real time. The time of purchase on the Website of the seller is used as the reference.