Video kit Intermediate
For all those who have tried filming and would like to enter more deeply, the video set Intermediate is a suitable solution. The two handles on the hand-shoulder video rig Cineast III enable calm guidance of your camera. In addition to the Follow Focus Spin and the sun shade Cineast I, this set comes with a 15 mm angle clamp, which serves as a device for further accessories , such as e.g. a magnetic arm.
Hand-shoulder Rig Cineast III
The walimex pro Hand-Shoulder-Video-Rig Cineast III is a stabilizing shoulder rig which allows the easy start into video filming. The shoulder bracket and both hand grips allows you to calmly direct your DSLR or system camera. The modular setup not only makes the use for left-handed and right-handed persons possible, it is also ideal for adjusting the rig individually to your height and fields of use. You can attach various accessories such as microphones, LED lights or a follow focus system with additional clamps and rods with a diameter of 15mm on the rig. Additionally, the 1/4 inch thread on the hand grip can be used to mount the shoulder rig or the adapter unit onto a tripod.
Follow Focus Spin
The Follow Focus by walimex pro allows you to focus smoothly when filming. With the Follow Focus you can precisely adjust the focus level. The white area on the wheel is provided for marking the focus sequence. On it you can mark various points, e.g. with stickers or water-soluble pens. An adjustable gear ring makes the use with lenses of a diameter from 52mm to 86mm possible. The Follow Focus can be mounted on either side of the lens. The gear can simply be moved to the other side of the Follow Focus, making it suitable for use on both sides of the lens. Due to the universal L plate, the Follow Focus can also be used without a rig. Simply mount the L-plate directly to your camera via the tripod thread and then the follow focus to the plate. This also makes the combination with a tripod possible which gives you additional flexibility in your work.
Matte Box Cineast I
With the Matte Box by walimex pro you can shield your camera from sunlight during shootings, and therefore prevent lens reflections (lens flares). This ensures professional film results. The degree of shielding can be freely selected, by adjusting the three movable barn doors individually. That way it is also possible to use them in combination with wide angle lenses. The lens hood is compatible with all DSLR rigs with 15mm rods at a distance of 6cm. It is mounted on the rods of the rig and locked into place. In order to adjust the Matte Box optimally to the used camera and lens, it can be adjusted in height.
15 mm angular clamp
Via the 15 mm angular clamp with 1/4 inch thread you can mount neary every accessory as e.g. a swivel arm.
Length Hand Grips approx. 13cm
Width max. approx. 25.5cm
Total Length max. approx. 49cm
Weight approx. 0.91 kg
Connection Quick-Release Plate 1/4 inch
Load Capacity approx. 8kg
Length Gear Ring approx. 36cm
Width Gear Ring 8mm
Width Wheel 58mm
Weight Gear Ring approx. 40g
Weight Follow Focus approx. 340g
Gear Ring for Lens Drive Industrial Standard Mod 0.8
Rig Rod Diameter 15mm
Rod Distance 6cm (center to center)
Material aluminum, ABS
Dimensions (HxWxD) approx. 11.4x14.2x4cm (without fastener and barn doors)
Adjustability (vertical) approx. 3.2cm
Inner Diameter approx. 8cm (for lenses with a filter diameter of 43 to 77mm)
Weight approx. 260g
Clamp Opening (o) 15mm
Distance (Clamp Openings) 4.5cm (6cm from center to center)
Material plastic, aluminum
Connecting Thread 1/4 inch (2x)
Diameter Clamp Openings 15mm
Material aluminum, plastic