The fastest and easiest way to repair dings and dents without painting. This is a professional repair kit designed to make you money. This kit is easy to use and includes everything you need to start your own Mobile Paintless Dent Repair Business or add Dent Repair to your current auto detailing or recondition business. You will be able to specialize in quick quality repairs of door dings, dents and hail damage.
1.Prep glue pulling tabs by soaking them in 91% rubbing alcohol and drying them before first use.
2.Clean the area to be repaired with 91% isopropyl rubbing alcohol and a clean towel. It is important to remove all wax and grease from the surface to insure the glue and dent pulling tabs properly adhere to the damaged area.
4.It is common for the dent pulling tab to release from the glue, leaving the glue on the panel of the vehicle. When this occurs, spray 91% rubbing alcohol on the edge of the glue and peel it away using the plastic scraper.
5.You may need to repeat steps until the desired result is achieved. It is not uncommon to repeat the process up to times.
6.Occasionally a high spot is created when pulling the dent. If this were to happen, gently tap down any high spots using the dent hammer and the plastic tap down tool provided, until the dent is flush. Be careful not to tap to hard or you might create additional low spots.
1X Dent Puller Slide Hammer
1X Dent Bridge
1X PDR Hammer
5X Tap Down Pen
1X 100w Glue Gun
5X Black Glue Stick
5X Yellow PDR Glue Sticks
48X Glue Tabs
1X Tool bag
1X Glue Scraper
1X Spray Bottle