DROK 200073 2in1 Battery Monitor Digital Voltmeter Tester for Electromobile, Waterproof LED Capacity Tester for 12V/24V/36V/48V Lead-acid Cell Lithium Battery, DC6-120V Volts Meter Panel
Prices may incl. VAT *
Last refresh Jan/31/2019 06:12 PM
Product Parameters: Voltage
measuring range: DC6-120V (exceed 120V may burn the product)
Test voltage: DC6~120V (decimal point automatic shift)
The minimum resolution below 100V: 0.1V
The minimum resolution above 100V: 1V
Power Resolution: 1%
Working current: 20mA
Display mode: LED display
Exterior dimension: L54*W30*H21mm
Installing dimension: 47.2*27.3mm
The measurement rate: more than 500mS/ times
Voltage measurement accuracy: 1% (±2 digits)
Lead length: >150mm Operating temperature: -10 ~ +65
Working humidity: 10 ~ 80% (no condensation)
Working pressure: 80 ~ 106kPa
Mode Instruction: 1-U
adjust voltage: setting battery type: setting
number of battery: setting "showing mode"
Battery Type Instruction(Mode 2-b): 1.2V: NI-MH battery, each battery 1.2V
2 V: Lead-acid battery, each battery 2V
3.2V: Lithium iron phosphate battery, each battery 3.2V
3.7V: Polymer battery, each battery 3.7V
12 V: Lead-acid battery, each battery 12V
Samples for setting: 12V
Lead-acid battery( 1 section 12V series): select 12.0 on "2-b" setting, select 1 on "3-c" 24V Lead-acid battery( 2 section 12V series): select 12.0 on "2-b" setting, select 2 on "3-c"
Long press or short press the button to set the product.
Please contact Customer Service to get the detail instruction.
Never use this meter on circuit with HID(high intensity discharge), or it may burn.
Latest products for Price Comparison
* The prices and shipping costs may have changed since the last update. It is technically not possible to update the prices in real time. The time of purchase on the Website of the seller is used as the reference.