Warm Tip :
This remote control only support the learning code (1527) of the receiver
This remote control can not clone other remote controls, it is only 1527 encoded remote control.
Decoding mode: MCU software decoding
Remote storage: 20
Support remote type: EV1527 learning code
Working mode: Momentary, toggle, latching time delay (5s ,10s ,15s )
Remote control battery: 2 x 3 V CR2016 button batteries
Note: Maximum input power is 250 V
Size: 59mm x 28mm x 8mm
Distance: Up to 50 meters
Operating frequency: 433.92MHz
Momentary: Push the remote button , the relay connects, release the remote button , the relay dis-connects.
Toggle: Push once the remote button , the relay connects , push twice the remote button , the relay dis-connects .
Latching: Push the remote button A, the relay connects, push the remote button B, the relay dis-connect.
Time delay modePush the remote control button , the relay connects , from when release the remote button ,
After 5s or 10s or 15s , the relay disconnect automatically .
2 x Receiver