Catalogue » Home & Kitchen » Seasonal Décor » Product details
Price comparison product image Adafruit NeoPixel Digital RGB LED Strip - Black 30 LED - 1m - BLACK [ADA1460]

Adafruit NeoPixel Digital RGB LED Strip - Black 30 LED - 1m - BLACK [ADA1460]

by Adafruit
New from:
US $10.98
Shipping:
see website
Prices may incl. VAT *
Last refresh Feb/03/2019 01:01 AM
or
or
EAN
0701851957375
Brand
Adafruit
You thought it couldn't get better than our world-famous 32-LED-per-meter Digital LED strip but we will prove you wrong! These NeoPixel strips have 30 digitally-addressable pixel LEDs per meter and are very affordable and are only 12.5 mm wide, 10 mm if you remove the strip from the casing. This is the strip with black flex PCB, its identical to the white 30 LED/meter except it has a different color mask on the flex stripThere are some things to watch for:These LED's use about 9.5 Watts max (~2 Amps @ 5V) per meter. The max rating is assuming all the LEDs are on full white, usually the actual current for colorful design is about 1/3 to 1/2 the max current. A good power supply such as our 5V 2A or 10A supply is key!Second, to get high density, the controller chip is inside the LED, which is kind of cool, but also means that the chip only uses a single pin for input and a single pin for output. The protocol used is very very timing-specific and can only be controlled by microcontrollers with highly repeatable 100nS timing precision. We have example code for using with the Arduino Uno/Mega microcontroller at 8MHz and 16MHz, and with a little effort you can use with the Raspberry Pi , or Beagle Bone Black , but it will not work with the Basic Stamp, NETduino, any other interpreted/virtual machine microprocessor or any processor slower than 8 MHz. For those processors, check our DotStar digital LED strip which has SPI-like input/output and works easily with Pi, NETduino, and other processors.The way the pixels are controlled by an Arduino, the entire strip must be buffered in memory, and we've found many Arduino UNO projects only have about a 1500bytes of RAM available after all the extras are included - enough for about 500 LED pixels. If you want to drive the entire strip and have some other libraries included, you may need to use a Mega.There are 30 RGB LED.

These meters are sold by the meter. Each meter will either have a female connector, male connector, or NO CONNECTOR. These strips are cut from a 5 meter real by Adafruit. When purchasing this item you need to plan on attaching your own JST connectors.

Latest products for Price Comparison

* The prices and shipping costs may have changed since the last update. It is technically not possible to update the prices in real time. The time of purchase on the Website of the seller is used as the reference.