1 x Remote Control (Battery included)
1 x Key Chain
1 x English Manual
1. While pressing the button 1 of the remote, press 4 times of the button 2. Release both buttons. Now the led emits a quick flash every 2 sec.
2. Press and hold the button 1 of the original remote control until our remote led will flashing every 1 second. Press the button 1 of our remote to save the code
3. The copy has been successful, after copy success, active the remote on the receiver, this action should be close to the gate opener. Press the button 1 of our remote until the led flash and go off. Then your new remote is ready to work
For ROLLING CODE REMOTE , please program the new remote on your devices (receiver / motor ) ,program method same as your orignal remote
It can work with most of the branded remote in the market, but don't work with all remotes, if you don't know if it's work with your remote or not, please contact us in advance. If you buy the wrong remote without contact us, we will not responsible for it
WE ARE TOTALLY COMMITTED TO 100% CUSTOMER SATISFACTION. We can guarantee that if you experience ANY problems we will endeavour to resolve them as a matter of urgency so please get in touch before leaving feedback.