RJ11 Telephone Network Tone Generator and Probe Kit,Lan Tracker Network Wire Finder
Prices may incl. VAT *
Last refresh Aug/08/2018 04:57 AM
1.Use the Sender(Switch to "Cont")Connect the test leads to the object pair,use "Cont"postion.The bright green of "Cont" indicates the continuity.(line resistance not exceeding 10K.)
2.Use the Sender(Switch to "Cont")
a.Connect the test leads to pair of cables,touch Receiver to the cables.if the two cables give larger and same tones,it means both of them have continuity.Otherwise the cable which gives lower tone does not have continuity.
b.Connect one test lead to one cable among a group of cables,connect another test lead and the other cables to earth ground.Touch the tip of Receiver to another end of the cable mentioned above.Reception of tone means that the cable has continuity.
USE SENDER(Switch to"OFF")
Connect the red test lead to the side of one line and the black test lead to the side of another line.
a."Cont"indicator light is "green"when you connect the red test lead to the Ring (-)side.
b."Cont"indicator lighe is "red"when you connect the red test lead to the TIP(+)side.
State on the working telephone line:connect the red test lead to the RING side,black test lead to the TIP side,or connect RJ11 into the RJ11 socket on telephone.
a."Cont"indicator light is "green",indicates a CLEAR line,if "CONT"indicator light is "red",it means the polarities were reversed.
b."Cont"indicator does not glow or glow faintly,indicates a BUSY line.
c."Cont"indicator light brightly flickering"YELLOW",indicates a RINGING line.(Switch to"CONT"will terminate the call one line).
1 x Cable Emitter
1 x Cable Receiver
1 x Toolkit
1 x User Manual
Latest products for Price Comparison
* The prices and shipping costs may have changed since the last update. It is technically not possible to update the prices in real time. The time of purchase on the Website of the seller is used as the reference.