iPhone 6 Screen Replacement For Lcd Touch Screen Digitizer Frame Assembly Set Coolmall369 Free Tool Kit included (White)
by Digital A-star
Prices may incl. VAT *
Last refresh Mar/17/2018 03:11 AM
Coolmall369 iPhone 6 screen repalcement 4.7 inch
1. Please make sure you are a special repair technician, because it is not an easy job to repair the screen.
2. Please test it by inserting the flex to your motherboard before installation, be sure you feel a gentle snap. If not, then try again,or the cable will not be connected properly and will not work functionality.
If your phone meet some problems like cannot turn on,touch insensitive, flash, lines on screen etc, please follow below steps:
1.Please check the LCD to make sure the flex cables are in good condition and there are no debris on the connector.
2.Disconnect and reconnect the flex cables from the motherboard side.
3.Then Reboot: Hold buttons (Home, Up volume, and Power button) untill the phone switch down and then switch up again.
4.Make sure IOS has been upgraded to the latest version.
5.Leave the phone alone for a while in a dry environment. Sometimes there is static after installing that will go away after some time. Please leave phone alone overnight and see if this problem persists in the morning.
1* iphone 6 4.7 inch LCD replacement assembly kit
1* Set Repair Tool Kits,
Warning: No protection & Inappropriate installation may cause injury. Please follow installation guide step by step.
1.Check bubble bag before open it. If found break, Please contact Amazon or Seller for exchange.
2.Please switch off phone to avoid any electrical injury before installation.
3.Not charge phone to avoid any electrical injury during replacement.
Latest products for Price Comparison
* The prices and shipping costs may have changed since the last update. It is technically not possible to update the prices in real time. The time of purchase on the Website of the seller is used as the reference.