1 Wax Warmer
20 Wooden Applicator Spatulas
5 Packs of Hard Wax Beans.
1 Wax Spoon
20 Body wax strips
Directions For Use:
If it is your first time using this product, please first test it on a small patch of the skin, if after 24 hours there is no allergic reaction, you can proceed with the full application. If you suffered an adverse reaction, please apply aloe Vera gel on your skin and do not use this product in future.
1.Wash the skin that will be waxed. Don't apply any oils, gels or lotions as they may prevent wax from properly adhering to the hair.
2.Put an appropriate amount of wax beans into pot.
3.Heat until wax beans are completely melted. After wax is melted turn the temperature dial to the middle.
4.Using a wooden applicator to spread a layer of wax on the skin along the direction of hair growth . (Make sure to test the temperature of the wax before pouring it onto your body!) When applying the wax leave the edges slightly thicker for easy removal.
5.Wait until wax is hard then holding the skin taut, peel it off rapidly against the direction of hair growth. Before the wax is removed, tap it a couple of times to check it has set and is ready to be removed.
1.Don't put water in the pot.
2. Make sure the wax is not too hot before applying to the skin.
3. Don't wax broken or irritated skin.
4.The thickness of spreading wax should be among 0.2cm to 0.5cm to insure best results.
5.Wait 2 hours after waxing before you take a shower ,exercise, or sun bathe. 6.If you are on medication that affects skin or have a skin related disorder, consult your doctor before use.
7.Keep the wax beans out of reach of children.